dmesg - Intel Pentium Silver J5040
microcode: microcode updated early to revision 0x18, date = 2020-06-09
Linux version 5.4.0-58-generic (buildd@lcy01-amd64-004) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 (Ubuntu 5.4.0-58.64-generic 5.4.73)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003dfff] usable
BIOS-e820: [mem 0x000000000003e000-0x000000000003ffff] reserved
BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
BIOS-e820: [mem 0x0000000012151000-0x000000006ad09fff] usable
BIOS-e820: [mem 0x000000006ad0a000-0x000000006d5b9fff] reserved
BIOS-e820: [mem 0x000000006d5ba000-0x000000006d5f5fff] ACPI data
BIOS-e820: [mem 0x000000006d5f6000-0x000000006d655fff] ACPI NVS
BIOS-e820: [mem 0x000000006d656000-0x000000006dae2fff] reserved
BIOS-e820: [mem 0x000000006dae3000-0x000000006e4e3fff] usable
BIOS-e820: [mem 0x000000006e4e4000-0x000000006e58ffff] reserved
BIOS-e820: [mem 0x000000006e590000-0x000000006ebfffff] usable
BIOS-e820: [mem 0x000000006ec00000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x63d9f018-0x63daf057] usable ==> usable
e820: update [mem 0x63d9f018-0x63daf057] usable ==> usable
e820: update [mem 0x63d90018-0x63d9e057] usable ==> usable
e820: update [mem 0x63d90018-0x63d9e057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000003dfff] usable
reserve setup_data: [mem 0x000000000003e000-0x000000000003ffff] reserved
reserve setup_data: [mem 0x0000000000040000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000000fffffff] usable
reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
reserve setup_data: [mem 0x0000000012151000-0x0000000063d90017] usable
reserve setup_data: [mem 0x0000000063d90018-0x0000000063d9e057] usable
reserve setup_data: [mem 0x0000000063d9e058-0x0000000063d9f017] usable
reserve setup_data: [mem 0x0000000063d9f018-0x0000000063daf057] usable
reserve setup_data: [mem 0x0000000063daf058-0x000000006ad09fff] usable
reserve setup_data: [mem 0x000000006ad0a000-0x000000006d5b9fff] reserved
reserve setup_data: [mem 0x000000006d5ba000-0x000000006d5f5fff] ACPI data
reserve setup_data: [mem 0x000000006d5f6000-0x000000006d655fff] ACPI NVS
reserve setup_data: [mem 0x000000006d656000-0x000000006dae2fff] reserved
reserve setup_data: [mem 0x000000006dae3000-0x000000006e4e3fff] usable
reserve setup_data: [mem 0x000000006e4e4000-0x000000006e58ffff] reserved
reserve setup_data: [mem 0x000000006e590000-0x000000006ebfffff] usable
reserve setup_data: [mem 0x000000006ec00000-0x000000007fffffff] reserved
reserve setup_data: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
reserve setup_data: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
reserve setup_data: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000027fffffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI=0x6d653000 ACPI 2.0=0x6d653014 SMBIOS=0x6d8f4000 SMBIOS 3.0=0x6d8f3000 MEMATTR=0x67b52418 ESRT=0x67b79998
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./J5040-ITX, BIOS P1.60 01/17/2020
tsc: Detected 1996.800 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00FF000000 mask 7FFF000000 write-combining
1 base 0000000000 mask 7F80000000 write-back
2 base 006F000000 mask 7FFF000000 uncachable
3 base 0070000000 mask 7FF0000000 uncachable
4 base 0100000000 mask 7F00000000 write-back
5 base 0200000000 mask 7F80000000 write-back
6 base 0090000000 mask 7FF0000000 write-combining
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x6ec00 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000067b79998 to 0x0000000067b799d0.
e820: update [mem 0x67b79000-0x67b79fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3ae1f000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006D653014 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006D652728 0000D4 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x000000006D5F3000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000006D5E6000 00C7B3 (v02 ALASKA A M I 01072009 INTL 20160930)
ACPI: FACS 0x000000006D655000 000040
ACPI: FPDT 0x000000006D5E5000 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000006D5E4000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000006D5F5000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: DBG2 0x000000006D5F4000 000072 (v00 INTEL GLK-SOC 00000003 BRXT 0100000D)
ACPI: DBGP 0x000000006D5E3000 000034 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
ACPI: HPET 0x000000006D5E1000 000038 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
ACPI: LPIT 0x000000006D5E0000 00005C (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
ACPI: APIC 0x000000006D5DF000 000084 (v04 INTEL GLK-SOC 00000003 BRXT 0100000D)
ACPI: NPKT 0x000000006D5DE000 000065 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
ACPI: SSDT 0x000000006D5D9000 003F72 (v02 INTEL DptfTab 00000003 BRXT 0100000D)
ACPI: SSDT 0x000000006D5D2000 0010B3 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D)
ACPI: SSDT 0x000000006D5D1000 0009FF (v01 Intel_ Platform 00001000 INTL 20160930)
ACPI: AAFT 0x000000006D5D0000 0002CE (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 0x000000006D5CF000 000661 (v02 PmRef Cpu0Ist 00003000 INTL 20160930)
ACPI: SSDT 0x000000006D5CE000 000775 (v02 CpuRef CpuSsdt 00003000 INTL 20160930)
ACPI: SSDT 0x000000006D5CD000 00035F (v02 PmRef Cpu0Tst 00003000 INTL 20160930)
ACPI: SSDT 0x000000006D5CC000 0001E6 (v02 PmRef ApTst 00003000 INTL 20160930)
ACPI: SSDT 0x000000006D5C9000 00286F (v02 SaSsdt SaSsdt 00003000 INTL 20160930)
ACPI: DMAR 0x000000006D5E2000 0000A8 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
ACPI: WDAT 0x000000006D5C8000 000104 (v01 00000000 00000000)
ACPI: WSMT 0x000000006D5DD000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000027fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000003dfff]
node 0: [mem 0x0000000000040000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000000fffffff]
node 0: [mem 0x0000000012151000-0x000000006ad09fff]
node 0: [mem 0x000000006dae3000-0x000000006e4e3fff]
node 0: [mem 0x000000006e590000-0x000000006ebfffff]
node 0: [mem 0x0000000100000000-0x000000027fffffff]
Zeroed struct page in unavailable ranges: 25659 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
On node 0 totalpages: 2005957
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 6705 pages used for memmap
DMA32 zone: 429098 pages, LIFO batch:63
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x70000000-0x7fffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0003e000-0x0003ffff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
PM: Registered nosave memory: [mem 0x63d90000-0x63d90fff]
PM: Registered nosave memory: [mem 0x63d9e000-0x63d9efff]
PM: Registered nosave memory: [mem 0x63d9f000-0x63d9ffff]
PM: Registered nosave memory: [mem 0x63daf000-0x63daffff]
PM: Registered nosave memory: [mem 0x67b79000-0x67b79fff]
PM: Registered nosave memory: [mem 0x6ad0a000-0x6d5b9fff]
PM: Registered nosave memory: [mem 0x6d5ba000-0x6d5f5fff]
PM: Registered nosave memory: [mem 0x6d5f6000-0x6d655fff]
PM: Registered nosave memory: [mem 0x6d656000-0x6dae2fff]
PM: Registered nosave memory: [mem 0x6e4e4000-0x6e58ffff]
PM: Registered nosave memory: [mem 0x6ec00000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
PM: Registered nosave memory: [mem 0xd1000000-0xd3708fff]
PM: Registered nosave memory: [mem 0xd3709000-0xd3709fff]
PM: Registered nosave memory: [mem 0xd370a000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x80000000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 1974590
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7635280K/8023828K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 388548K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 44541 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed64000 flags: 0x0
DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
DMAR: DRHD base: 0x000000fed65000 flags: 0x1
DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000006d558000 end: 0x0000006d577fff
DMAR: RMRR base: 0x0000006f800000 end: 0x0000007fffffff
DMAR-IR: IOAPIC id 1 under DRHD base 0xfed65000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed65000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=7987200)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
x86/cpu: User Mode Instruction Prevention (UMIP) activated
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (15974.40 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x6d5f6000-0x6d655fff] (393216 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 20:10:11, date: 2020-12-18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1608322211.040:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9951B61D8800 000190 (v02 PmRef Cpu0Cst 00003001 INTL 20160930)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9951B61D8E00 0001E6 (v02 PmRef ApIst 00003000 INTL 20160930)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9951B6078600 0000C9 (v02 PmRef ApCst 00003000 INTL 20160930)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 11 GPEs in block 00 to 7F
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER LTR]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x70000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit]
pci 0000:00:02.0: [8086:3184] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
pci 0000:00:0f.0: reg 0x10: [mem 0xa1215000-0xa1215fff 64bit]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
pci 0000:00:12.0: reg 0x10: [mem 0xa1210000-0xa1211fff]
pci 0000:00:12.0: reg 0x14: [mem 0xa1214000-0xa12140ff]
pci 0000:00:12.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:12.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:12.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:12.0: reg 0x24: [mem 0xa1213000-0xa12137ff]
pci 0000:00:12.0: PME# supported from D3hot
pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.1: [8086:31d9] type 01 class 0x060400
pci 0000:00:13.1: PME# supported from D0 D3hot D3cold
pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
pci 0000:00:15.0: reg 0x10: [mem 0xa1200000-0xa120ffff 64bit]
pci 0000:00:15.0: PME# supported from D3hot D3cold
pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
pci 0000:00:1f.1: reg 0x10: [mem 0xa1212000-0xa12120ff 64bit]
pci 0000:00:1f.1: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:00:13.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit]
pci 0000:03:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
pci 0000:03:00.0: Max Payload Size set to 128 (was 128, max 128)
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: PCI bridge to [bus 03]
pci 0000:00:13.2: bridge window [io 0xe000-0xefff]
pci 0000:00:13.2: bridge window [mem 0xa1100000-0xa11fffff]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:04:00.0: reg 0x24: [mem 0xa1000000-0xa10001ff]
pci 0000:00:13.3: PCI bridge to [bus 04]
pci 0000:00:13.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:13.3: bridge window [mem 0xa1000000-0xa10fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0003e000-0x0003ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x63d90018-0x63ffffff]
e820: reserve RAM buffer [mem 0x63d9f018-0x63ffffff]
e820: reserve RAM buffer [mem 0x67b79000-0x67ffffff]
e820: reserve RAM buffer [mem 0x6ad0a000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6e4e4000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6ec00000-0x6fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 19.200000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0280-0x028f] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x02a0-0x02af] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0500-0x05fe] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:00:13.1: PCI bridge to [bus 02]
pci 0000:00:13.2: PCI bridge to [bus 03]
pci 0000:00:13.2: bridge window [io 0xe000-0xefff]
pci 0000:00:13.2: bridge window [mem 0xa1100000-0xa11fffff]
pci 0000:00:13.3: PCI bridge to [bus 04]
pci 0000:00:13.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:13.3: bridge window [mem 0xa1000000-0xa10fffff]
pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 11 [mem 0x70000001-0x7fffffff window]
pci_bus 0000:00: resource 12 [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xa1100000-0xa11fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xa1000000-0xa10fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
fbcon: Taking over console
Freeing initrd memory: 83836K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x5fd8e000-0x63d8e000] (64MB)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
clocksource: Switched to clocksource tsc
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0x90000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11242020
intel_idle: v0.4.1 model 0x7A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (31 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:15.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:15.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 7 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x706a8, pf=0x1, revision=0x18
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L2 allocation detected
resctrl: L2DATA allocation detected
resctrl: L2CODE allocation detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (770547884, 659108)->(775446467, -4239475)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6b3d3d266049f4a4077ed3557f79f9ce7832433a'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 0:130:195
acpi device:50: hash matches
rtc_cmos 00:04: setting system clock to 2020-12-18T20:10:12 UTC (1608322212)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2720K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1212K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xa1213000 port 0xa1213100 irq 127
ata2: SATA max UDMA/133 abar m2048@0xa1213000 port 0xa1213180 irq 127
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host2: ahci
scsi host3: ahci
ata3: SATA max UDMA/133 abar m512@0xa1000000 port 0xa1000100 irq 128
ata4: SATA max UDMA/133 abar m512@0xa1000000 port 0xa1000180 irq 128
i801_smbus 0000:00:1f.1: SPD Write Disable is set
i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
libphy: r8169: probed
r8169 0000:03:00.0 eth0: RTL8168h/8111h, a8:a1:59:43:b8:0f, XID 541, IRQ 129
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
cryptd: max_cpu_qlen set to 1000
SSE version of gcm_enc/dec engaged.
r8169 0000:03:00.0 eno1: renamed from eth0
checking generic (90000000 1d5000) vs hw (90000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] couldn't get memory information
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[drm] Applying Increase DDI Disabled quirk
usb 1-3: new high-speed USB device number 2 using xhci_hcd
usb 1-3: New USB device found, idVendor=13fd, idProduct=1840, bcdDevice= 1.08
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: External
usb 1-3: Manufacturer: Generic
usb 1-3: SerialNumber: 533158344A44525A39303239
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-6: new low-speed USB device number 3 using xhci_hcd
usb 1-6: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: USB Optical Mouse
usb 1-6: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.0/0003:046D:C077.0001/input/input2
hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:15.0-6/input0
ata4: SATA link down (SStatus 0 SControl 300)
[drm] failed to retrieve link info, disabling eDP
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
fbcon: i915drmfb (fb0) is primary device
scsi 4:0:0:0: Direct-Access Generic External 1.08 PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sda] No Caching mode page found
sd 4:0:0:0: [sda] Assuming drive cache: write through
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
raid6: sse2x4 gen() 9863 MB/s
raid6: sse2x4 xor() 3150 MB/s
raid6: sse2x2 gen() 8883 MB/s
raid6: sse2x2 xor() 5612 MB/s
raid6: sse2x1 gen() 7327 MB/s
raid6: sse2x1 xor() 4780 MB/s
raid6: using algorithm sse2x4 gen() 9863 MB/s
raid6: .... xor() 3150 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 15723.000 MB/sec
generic_sse: 13607.000 MB/sec
xor: using function: prefetch64-sse (15723.000 MB/sec)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Started Journal Service.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[329]: Received client request to flush runtime journal.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
proc_thermal 0000:00:00.1: Creating sysfs group for PROC_THERMAL_PCI
mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
intel_telemetry_core Init
Invalid pltconfig, ensure IPC1 device is enabled in BIOS
Invalid pltconfig, ensure IPC1 device is enabled in BIOS
Invalid pltconfig, ensure IPC1 device is enabled in BIOS
Invalid pltconfig, ensure IPC1 device is enabled in BIOS
audit: type=1400 audit(1608322226.543:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=494 comm="apparmor_parser"
audit: type=1400 audit(1608322226.767:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=492 comm="apparmor_parser"
audit: type=1400 audit(1608322226.771:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=493 comm="apparmor_parser"
audit: type=1400 audit(1608322226.771:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=495 comm="apparmor_parser"
audit: type=1400 audit(1608322226.771:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=492 comm="apparmor_parser"
audit: type=1400 audit(1608322226.771:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=492 comm="apparmor_parser"
audit: type=1400 audit(1608322226.839:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=499 comm="apparmor_parser"
audit: type=1400 audit(1608322226.847:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=497 comm="apparmor_parser"
audit: type=1400 audit(1608322227.131:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=501 comm="apparmor_parser"
audit: type=1400 audit(1608322227.131:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=501 comm="apparmor_parser"
kauditd_printk_skb: 11 callbacks suppressed
audit: type=1400 audit(1608322233.875:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=498 comm="apparmor_parser"
audit: type=1400 audit(1608322233.875:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=498 comm="apparmor_parser"
audit: type=1400 audit(1608322244.167:25): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=665 comm="cups-browsed" capability=23 capname="sys_nice"
Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
r8169 0000:03:00.0 eno1: Link is Down
r8169 0000:03:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3144 > 3137), lowering kernel.perf_event_max_sample_rate to 63500